BALL JOINTS – Steel, Zinc Plated

Special linkages are easily assembled with Ball Joints made of Steel and plated with Zinc. They permit levers to work hinged arms without binding or stressing. Available in adjustable, positive, slip–on and swivel action. Threaded Rod is recommended for use with these Ball Joints. See page 200 for a selection of sizes in various materials.

POSITIVE ADJUSTABLE TYPE BJS–01

This type does not have spring tension. The shell is drilled five ways. The fine pitch thread top bearing is inserted and locked by a cotter pin to provide desired free movement.

POSITIVE ADJUSTABLE TYPE – BJS–01     Part No. BJS–01 A Thread Size   #10   Threads Per Inch   32 B Overall Length   1-1/4" C Shank Length   7/16" D Height to Center/Length   7/8" E Length to Ball   7/8"     Each $8.40     10 $69.50

STRAIGHT SWIVEL TYPE – BJS–03 & BJS–04

Straight Swivel Type Ball Joints are for motion transmittal applications where the forces exerted are relatively light. The end of the male thread base is spun over the ball and a neoprene washer is used to cushion movement and maintain proper tension.

STRAIGHT SWIVEL TYPE – BJS–03 & BJS–04     Part No. BJS–03 BJS–04 A Thread Size   #10 1/4"   Threads Per Inch   32 28 B Overall Length   2-1/32" 2-3/32" C Shank Length   9/16" 9/16"     Each $11.95 $5.65     10 $99.50 $47.00

SWIVEL TYPE – BJS–05 & BJS–06

The specially designed short neck of the Swivel Type ball stud enables greater load capacity. Swivel construction is assembled with a grease resistant neoprene washer to cushion movement and maintain proper tension. This type allows for rapid adjustment over great length.

	SWIVEL TYPE – BJS–05 & BJS–06     Part No. BJS–05 BJS–06 A Thread Size   #10 1/4"   Threads Per Inch   32 28 B Overall Length   1-11/16" 1-13/16" C Shank Length   1/2" 7/16" D Height to Center/Length   5/8" 25/32" E Hole Diameter   0.192" 0.320"     Each $15.80 $4.75     10 $131.75 $39.50

SLIP ON – QUICK DISCONNECT TYPE – BJS–07 & BJS–08

Retraction of the outer shell exposes the socket for quick insertion or withdrawal of the ball screw. This design completely houses compression spring and retains ball screw in its socket. Ball screw socket is machined into the shell with tolerance for minimum end play.

QUICK DISCONNECT TYPE – BJS–07 & BJS–08     Part No. BJS–07 BJS–08 A Thread Size   #10 1/4"   Threads Per Inch   32 28 B Overall Length   1-3/32" 1-3/32" C Shank Length   7/16" 9/16" D Height to Center/Length   29/32" 1-1/32" E Length to Ball   29/32" 29/32"     Each $5.25 $4.65     10 $43.75 $38.50