Models: 207, 210
Unique Clamps that lock in position with the aid of a relese lever in both clamped and unclamped positions. Model: 225
Features a locking release lever which locks in the clamped position only. Model: 235
Equipped with a locking release lever which locks in the clamped position only. Models: 305, 307
Featuring a locking release lever that locks in the clamped position only. Models: 331, 341
Supplied with a release lever catch accessory which allows the clamp to lock in closed position only.. Model: 351
Supplied with a release lever catch accessory which allows the clamp to lock in closed position only. Model: 603
Patented design locks the release lever into the forged steel base to prevent accidental opening. Well adapted for use in comfined areas because of its small package size and low height. Model: 630
Includes a locking release lever, which locks into the rugged forged steel base. Larger handle pad for greater operator comfort. Series: 205
This is the smallest of the horizontal handle, horizontal bar clamps. Supplied with bonded neoprene–tipped M4 spindle assembly. Series: 213, 217, 227
The bar guide gives extra lateral support and rigidity to the hold-down bar at the front of the base. Designed to give more hand clearance between the bar and handle when the clamps are in the full open position. Series: 215
Minimum overhead clearance is required by this low silhouette series. Models furnished with 1/4-20 bonded neoprene-tipped spindle assembly, washers for “U” bar models, or bolt retainer for solid bar models. Series: 225
Gives increased holding capacity resulting in greater rigidity and better all-around performance. Furnished with 5/16-18 bonded neoprene spindle assembly and flanged washers. Series: 235
A heavier version of series 225. Equipped with red vinyl handle, bonded neoprene-tipped M10 spindle assembly and flanged washers. Series: 305, 307
These low silhouette hold-down clamps feature an unusual handle that can be operated from either side or behind. These small compact units provide considerable holding capacity in a small package size. Series: 351
Excellent for many types of latching operations. With base bolted or welded in place, unit can be used for latching pressure vessels, clean outdoors, etc. Models: 323, 331, 341
The over–center toggle action of these clamps suits them ideally for holding against heavy forces such as those generated in plastic molding operations. Model: 351000
DE–STA–CO has developed J–hook latch plates to help reduce engineering time when installing DE–STA–CO J–hook style clamps. Model: 201
This is the smallest series in the vertical handle hold-down clamping series. Model: 202
Two bar styles available making the spindle position fixed (Model DSC–202) or adjustable (Model DSC-202–U). Model: 207
This series has more models than any other in the line. There are bar, handle and base variations and two stainless steel models. Model: 210
Popular because of its size and holding capacity. Ergonomic handle grips are included for greater operator comfort. Model: 247
Series 247 are compact heavy–duty models utilizing the bar guide feature for stability. Model: 802
The 802 provides 200 lbs. holding capacity in a package which is 7 inches long. The double acting power cylinder has built–in speed control and needs only to be hooked up to a controlled air or hydraulic power source. Model: 803
This compact plunger action clamp is less than 10" long but provides a holding capacity of up to 600 lbs. Model: 807
Two versions are available. Model 807–S with solid steel hold–down bar and Model 807–U with “U” bar. Model: 810
Similar to Series 807 but larger and higher capacity. Model: 812
Smallest of the hold–down models, this miniature clamp is the air–powered of Series 201. Model: 816
The miniature straight–line clamp is the air–powered version of Model 601. Model: 830
The 5/8" diameter plunger travels forward 1–1/4" from an open to a closed and locked position. Model: 847
Series 247 are compact heavy–duty models utilizing the bar guide feature for stability. Model: 601
Smallest of the straight–line toggle clamps. Ideal for electronic applications and similar small fixturing. Models: 602, 604
Fully retractable locators, these models mount directly through a member by a jam nut (supplied) on the work side or flush by drilling and tapping the member. Locks in extended or retracted posotion. Model: 603
The straight–line action toggle clamp has a large holding capacity for its size. The 603 is well adapted for use in confined areas because of its small package size and low height. Model: 605
For push and pull clamping. Furnished with ergonomic grip. Model: 607
Extremely compact for its large capacity, this low silhouette clamp locks in either extended or retracted position. Model: 630
With a forged alloy steel base, these rugged units are designed for heavy–duty service. They offer maximum capacity for their size.

Model: 802, 803, 807, 810, 812, 816, 830, 847

Model: 601, 602, 604, 603, 605, 607, 630