 |
| Customer Info |
|
|
 |
|
|
|
Miter and Bevel gears transmit motion and power between intersecting shafts
positioned at right angles. Both gear types are cut with a generated tooth form that has a localized lengthwise tooth bearing. These gears
permit minor adjustment of gears during assembly and allow for some displacement due to deflection under operating loads without concentrating
the load on the end of the tooth. For reliable performance, Gears must be pinned to shaft with a dowel or taper pin.
A set of Miter gears consists of two identical gears that yield a 1:1 ratio. Bevel gear sets consist of two gears of different pitch diameter
that yield ratios greater than 1:1. Undrilled.
No set screw supplied.
|
GBM-4815 |
15 |
0.312 |
0.07 |
0.125 |
0.312 |
0.215 |
0.25 |
0.13 |
$7.85 |
GBM-4818 |
18 |
0.375 |
0.08 |
0.125 |
0.406 |
0.286 |
0.31 |
0.16 |
$16.22 |
|
GBM-3216 |
16 |
0.500 |
0.12 |
0.188 |
0.500 |
0.349 |
0.41 |
0.19 |
$8.88 |
GBM-3224 |
24 |
0.750 |
0.14 |
0.188 |
0.688 |
0.427 |
0.50 |
0.25 |
$10.88 |
|
|
View Cart |
Log in | Open an Account
All New Products
